S1141 150


● Tg150℃(DSC)
UV   Blocking/AOI兼容


● 電腦、儀器儀表、攝像機、通訊設備、電子游戲機、汽車電子等
● 不適用于有CAF要求的應用
● 不適用于2oz以上厚銅、HDI及12層以上的高多層板
  • 產品性能
  • 產品證書
  • 資料下載
Items Method Condition Unit Typical Value
Tg IPC-TM-650 2.4.25 DSC 150
Td IPC-TM-650 5% wt. loss 310
CTE (Z-axis) IPC-TM-650 2.4.24 Before Tg ppm/℃ 65
After Tg ppm/℃ 300
50-260℃ % 4.2
T260 IPC-TM-650 TMA min 15
T288 IPC-TM-650 TMA min 2
Thermal Stress IPC-TM-650 288℃, solder dip -- 60S  No Delamination
Volume Resistivity IPC-TM-650 After moisture resistance MΩ.cm 4.7E + 08
E-24/125 MΩ.cm 5.3E + 06
Surface Resistivity IPC-TM-650 After moisture resistance 5.3E + 07
E-24/125 5.4E + 06
Arc Resistance IPC-TM-650 2.5.1 D-48/50+D-4/23 s 120
Dielectric Breakdown IPC-TM-650 2.5.6 D-48/50+D-4/23 kV 60
Dissipation Constant (Dk) IPC-TM-650 1MHz -- 4.6
IEC 61189-2-721 10GHz --
Dissipation Factor (Df) IPC-TM-650 1MHz -- 0.015
IEC 61189-2-721 10GHz --
Peel Strength (1oz HTE copper foil) IPC-TM-650 2.4.8 A N/mm
After thermal Stress 288℃,10s N/mm 1.8
125℃ N/mm 1.6
Flexural Strength LW IPC-TM-650 2.4.4 A MPa 600
CW IPC-TM-650 2.4.4 A MPa 500
Water Absorption IPC-TM-650 E-1/105+D-24/23 % 0.15
CTI IEC60112 A Rating PLC 3
Flammability UL94 C-48/23/50 Rating V-0
E-24/125 Rating V-0


1. Specification sheet: IPC-4101/21, is for your reference only.

2. All the typical values are based on the 1.6mm specimen,while the Tg is for specimen≥0.50mm.

3. All the typical values listed above are for your reference only and not intended for specification. Please contact Shengyi Technology Co., Ltd. for detailed information. All rights from this data sheet are reserved by Shengyi Technology Co., Ltd.

Explanation: C=Humidity conditioning, D=Immersion conditioning in distilled water, E=Temperature conditioning

The first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.

手游棋牌外挂网 pc蛋蛋群 海王捕鱼总换吗 三中三复式计算表图 海南环岛赛彩票攻略 三分彩官网平台官网娱 聚乐彩群 山西快乐10分开奖直播 急速赛车官网 金博棋牌最新版下载 历史开奖胜负平